Halyard H500 Sterilization Wrap, 24 x 24 Inch

The CSSD workhorse for heavy instrument sets — Halyard H500 sterilization wrap pairs Powerguard SMS polypropylene fabric with the penultimate strength level in the Halyard line, sized 24 x 24 inches for standard surgical trays.

H500 is the wrap surgical CSSD reaches for when the load is going to get handled: heavy instrument sets, retractors, and trays that move repeatedly between sterilizer, storage, and the sterile field. Low-lint spunbond-meltblown-spunbond (SMS) fabric gives the wrap tear resistance for that handling, while Powerguard technology delivers the enhanced microbial barrier that surgical sterility depends on. Cased 250 sheets, dark blue.

Key Benefits

• Heavy-set ready: H500 is the penultimate strength level in the Halyard line — built for instrument sets, retractors, and trays where frequent handling is normal.
• Powerguard microbial barrier: Halyard's enhanced barrier technology protects sterilized contents through transport and storage.
• Steam and EO gas compatible: Validated for pre-vacuum steam and ethylene oxide (EO) sterilant penetration.
• Low-lint SMS fabric: Spunbond-meltblown-spunbond construction keeps lint shedding low at the sterile field.
• Standard 24 x 24 in (2 x 2 ft) size: Fits the typical surgical instrument tray with proper overhang.

Features & Design

• 24 x 24 inch (2 x 2 ft) sequential wrap
• SMS (spunbond-meltblown-spunbond) polypropylene fabric, low lint
• Powerguard technology for enhanced microbial barrier
• Dark blue color for clear contrast against instruments
• Validated for pre-vacuum steam and ethylene oxide (EO) sterilization
• 250 sheets per case — standard re-order pack for surgical CSSD

Specifications

Halyard Strength Levels — Choosing the Right Wrap

Ideal For

• Hospital and ASC surgical CSSD: the daily wrap for heavy instrument sets.
• Orthopedic and general-surgery trays: handles repeated transport and inspection.
• Facilities standardized on Halyard: H500 sits one level below the H600 top of the line.
• High-handling workflows: trays moved frequently between sterilizer, storage, and OR.
• Steam- and EO-gas-driven sterilization workflows.

Care & Compatibility

Single-use sequential wrap. Validated for pre-vacuum steam and ethylene oxide (EO) gas cycles — follow your sterilizer manufacturer's parameters. Inspect each sheet visually before use; discard any wrap with tears, pin-holes, or visible contamination. Store sealed cases in a clean, dry environment away from direct sunlight.