Halyard H400 Sterilization Wrap, 24 x 24 Inch

A step up from the H300 daily-driver — H400 SMS polypropylene at 24 x 24 inches, engineered for basin/instrument sets, procedure trays, and drill packs that need extra barrier headroom without jumping to H500 weight.

H400 is the fourth strength level in the Halyard line — positioned between the H300 routine workhorse and the H500 heavy-set wrap. CSSD reaches for it when the load is more demanding than typical routine wrapping but doesn't require the H500 weight class: basin/instrument combination sets, procedure trays, and drill packs. Low-lint SMS polypropylene with Powerguard barrier technology, medium blue, 250 sheets per case.

Key Benefits

• Step up from routine: H400 sits between H300 and H500, ideal for basin/instrument sets, procedure trays, and drills.
• Powerguard microbial barrier: Enhanced barrier protection through transport and storage.
• Steam and EO gas compatible: Pre-vacuum steam and ethylene oxide (EO) sterilant penetration.
• Low-lint SMS fabric: Reduces lint shedding at the sterile field.
• Standard 24 x 24 in (2 x 2 ft) size: Fits the typical instrument or basin set with proper overhang.

Features & Design

• 24 x 24 inch (2 x 2 ft) sequential wrap
• SMS polypropylene fabric, low lint
• Powerguard technology for enhanced microbial barrier
• Medium blue color
• Validated for pre-vacuum steam and ethylene oxide (EO) sterilization
• 250 sheets per case

Specifications

Halyard H400 Companion Sizes

Ideal For

• Basin/instrument combination sets: the H400 sweet spot.
• Procedure trays and drill packs: step up from H300 when extra barrier headroom is needed.
• Hospital and ASC surgical CSSD: middle of the Halyard line, the wrap for demanding-but-not-heavy loads.
• Facilities standardized on Halyard: matched between the H300 routine and H500 heavy-set tiers.
• Steam- and EO-gas-driven sterilization workflows.

Care & Compatibility

Single-use sequential wrap validated for pre-vacuum steam and ethylene oxide (EO) gas cycles. Inspect every sheet for tears or pin-holes before use; discard any wrap with visible damage. Store sealed cases in a clean, dry environment away from direct sunlight.