Halyard H300 Sterilization Wrap, 30 x 30 Inch

The 30 x 30 inch sibling of the H300 medium-grade workhorse — same low-lint SMS polypropylene, same Powerguard barrier, sized for medium instrument sets and larger procedure trays.

When a 24 x 24 isn't quite enough but a 40 x 40 is overkill, the H300 30 x 30 sits exactly where most CSSD techs want it — large enough for medium instrument sets and larger procedure trays, with the same trusted H300 fabric and barrier technology. Medium blue, 300 sheets per case.

Key Benefits

• Medium-set sized: 30 x 30 inches fits medium instrument sets and procedure trays with proper overhang.
• Routine-workflow grade: H300 medium strength — the daily-driver fabric.
• Powerguard microbial barrier: Enhanced barrier protection through transport and storage.
• Steam and EO gas compatible: Pre-vacuum steam and ethylene oxide (EO) sterilant penetration.
• Low-lint SMS fabric: Reduces lint shedding at the sterile field.

Features & Design

• 30 x 30 inch sequential wrap
• SMS polypropylene fabric, low lint
• Powerguard technology for enhanced microbial barrier
• Medium blue color
• Validated for pre-vacuum steam and ethylene oxide (EO) sterilization
• 300 sheets per case

Specifications

Halyard H300 Companion Sizes

Ideal For

• Surgical CSSD with mid-size trays: bridges the 24-in standard and 40-in oversized sizes.
• Hospital and ASC routine workflows: daily-driver wrap for medium loads.
• Procedure-tray bundling: small bundles that exceed a 24 x 24 footprint.
• Facilities standardized on Halyard: matched companion to the 24 x 24 daily stock.
• Steam- and EO-gas-driven sterilization workflows.

Care & Compatibility

Single-use sequential wrap validated for pre-vacuum steam and ethylene oxide (EO) gas cycles. Inspect every sheet for tears or pin-holes before use; discard any wrap with visible damage. Store sealed cases in a clean, dry environment away from direct sunlight.