Halyard H300 Sterilization Wrap, 24 x 24 Inch

The everyday medium-grade Halyard surgical wrap — H300 SMS polypropylene at 24 x 24 inches, the standard daily wrap for routine surgical instrument sets and procedure trays.

H300 is the third strength level in the Halyard line — the medium-grade wrap most surgical CSSDs reach for during routine workflows. Low-lint SMS polypropylene fabric with Powerguard barrier technology gives consistent protection across pre-vacuum steam and ethylene oxide (EO) gas cycles, sized 24 x 24 inches (2 x 2 ft) for standard instrument trays. Medium blue, 500 sheets per case — the high-volume reorder pack.

Key Benefits

• Routine-workflow workhorse: H300 is engineered for instrument sets and procedure trays — the daily surgical wrap.
• Powerguard microbial barrier: Enhanced barrier protection through transport and storage.
• Steam and EO gas compatible: Pre-vacuum steam and ethylene oxide (EO) sterilant penetration.
• Low-lint SMS fabric: Reduces lint shedding at the sterile field.
• High-volume case pack: 500 sheets per case for high-throughput departments.

Features & Design

• 24 x 24 inch (2 x 2 ft) sequential wrap
• SMS (spunbond-meltblown-spunbond) polypropylene fabric, low lint
• Powerguard technology for enhanced microbial barrier
• Medium blue color
• Validated for pre-vacuum steam and ethylene oxide (EO) sterilization
• 500 sheets per case

Specifications

Halyard H300 Companion Sizes

Ideal For

• Hospital and ASC surgical CSSD: the everyday medium-grade wrap for routine workflows.
• Routine instrument-set wrapping: H300's optimized weight class.
• Procedure-tray wrapping: common-load surgical packs and trays.
• Facilities standardized on Halyard: the daily-driver between the light H100/H200 and heavy H500/H600.
• High-throughput departments: 500 sheets per case for bulk consumption.

Care & Compatibility

Single-use sequential wrap validated for pre-vacuum steam and ethylene oxide (EO) gas cycles. Follow your sterilizer manufacturer's parameters. Inspect each sheet visually before use and discard any wrap with tears, pin-holes, or visible contamination. Store sealed cases in a clean, dry environment away from direct sunlight.